BCBMD - BIS 2-(2-METHOXYETHOXY)ETHYL ETHER P4739
- MSDS: BCBMD
- Manufacturer: EASTMAN KODAK COMPANY
- Product Name: BIS 2-(2-METHOXYETHOXY)ETHYL ETHER P4739
- National Stock Number: 6810-00K000809
Product Identification
Product ID:BIS 2-(2-METHOXYETHOXY)ETHYL ETHER P4739
MSDS Date:01/01/1985
FSC:6810
NIIN:00K000809
MSDS Number: BCBMD
Responsible Party
Emergency Phone: 716-722-0271
Cage: 19139
Contractor
Telephone: 716-722-5151/(800) 242-2424
Cage: 19139
Ingredients
2,5,8,11,14-PENTAOXAPENTADECANE (CAS #143-24-8)
CAS: 143-24-8
RTECS: SB0400000
Fraction By Weight: 100%
Hazards
Effects of Overexposure:INH:IRRIT BY VAP;EYES:PAINFUL BY LIQ
CONTCT;SKIN:IRRIT IF PROLONGD/REPEATEDLY CONTACTED.SKIN ABSORBS
First Aid
First Aid:INH:REMOVE TO FRESH AIR.GIVE CPR/OXY IF NEEDED IN SEVERE
CONDITIONS;EYS/SKIN:IMMEDIATELY FLUSH W/PLENTY OF WATER & GET MED
ATTN FOR EYES.
Fire Fighting
Flash Point:285F(141C),OC
Lower Limits:0.9%
Upper Limits:UNK
Extinguishing Media:CO*2,DRY CHEM,WATER
Fire Fighting Procedures:AIR MASK SHOULD BE WORN
Unusual Fire/Explosion Hazard:MAY FORM EXPLOSIVE PEROXIDE
Accidental Release
Spill Release Procedures:WEARING SUITAB PROTECTIVE CLOTHING,ABSORB
SPILLED MATL ON VERMICULITE.PLACE IN FIBER CARTON.
Handling
Handling and Storage Precautions:STORE IN COOL DRY PLACE.IF STORED MORE
THAN SIX MONTHS,ANALYZE FOR PEROXIDES BEFORE USING THE PRODUCT.KEEP
CONTAINERS AIR TIGHT.
Other Precautions:STORING ABOVE 85F FOR LONGER THAN SIX MONTHS OR
EVAPORATION TO DRYNESS SHOULD BE AVOIDED BECAUSE OF POSSIBLE
PEROXIDE FORMATION.
Exposure Controls
Respiratory Protection:NONE
Ventilation:MECHANICAL(GENERAL);LOCAL EXHAUST REQUIRED IF HEATED CHEM.
Protective Gloves:RESISTANT
Eye Protection:SAFETY/CHEM GOGGLES
Other Protective Equipment:NONE INDICATED
Supplemental Safety and Health
FORMULA:CH*3(OCH*2CH*2)*40CH*3;MFGR MSDS DATE 1/24/77.
Chemical Properties
HCC:N1
Boiling Pt:B.P. Text:525F(274C)
Vapor Pres:.01
Vapor Density:7.7
Spec Gravity:1.013
Solubility in Water:COMPLETE
Appearance and Odor:COLORLESS LIQUID,MILD ETHERAL ODOR
Percent Volatiles by Volume:NEGL
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS
Stability Condition to Avoid:SOURCE OF IGN
Hazardous Decomposition Products:THERML DECOMP/BURNG MAY PRODUCT
PEROXIDES,CO &/OR CO*2
Disposal
Waste Disposal Methods:INCINERATE THE SPILLED MATL IAW LOCAL,STATE &
FED REGS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.